Products

Straight Plunge Router Bits: High Production Router Bits, Carbide Tipped: 1" Dia x 1-1/4" x 1/2" ShankUse a two-flute bit where fine finish is para...

Trimming Router Bits: Flush Trim Plunge Template, Carbide Tipped: 1/2" Dia x 1" x 1/4" Shank with Upper BBThis bit is essentially a plunge-cutting ...

Trimming Router Bits: Flush Trim Plunge Template, Carbide Tipped: 1/2" Dia x 1/4" x 1/4" Shank with Upper BBThis bit is essentially a plunge-cuttin...

Trimming Router Bits: Flush Trim Plunge Template, Carbide Tipped: 5/8" Dia x 1" x 1/4" Shank with Upper BBThis bit is essentially a plunge-cutting ...

Trimming Router Bits: Flush Trim Plunge Template, Carbide Tipped: 3/4" Dia x 1" x 1/2" Shank with Upper BBThis bit is essentially a plunge-cutting ...

Trimming Router Bits: Flush Trim Plunge Template, Carbide Tipped: 3/4" Dia x 1" x 1/4" Shank with Upper BBThis bit is essentially a plunge-cutting ...

Trimming Router Bits: Flush Trim Plunge Template, Carbide Tipped: 1-1/8" Dia x 1-1/2" x 1/2" Shank with Upper BBThis bit is essentially a plunge-cu...

Straight Plunge Router Bits: Mortising Router Bits, Carbide Tipped: 3/4" Dia x 3/4" x 1/4" ShankCutting mortises for hinges and locks can be challe...

Straight Plunge Router Bits: Mortising Router Bits, Carbide Tipped: 5/8" Dia x 3/4" x 1/4" ShankCutting mortises for hinges and locks can be challe...

Straight Plunge Router Bits: Mortising Router Bits, Carbide Tipped: 3/4" Dia x 3/4" x 1/4" ShankCutting mortises for hinges and locks can be challe...

Straight Plunge Router Bits: Mortising Router Bits, Carbide Tipped: 1-1/4" Dia x 3/4" x 1/2" ShankCutting mortises for hinges and locks can be chal...

Trimming Router Bits: Panel Pilot Router Bits, Carbide Tipped: 1/4" Dia x 3/4" x 1/4" ShankThese panel pilot bits have a pointed tip for plunge cut...

Trimming Router Bits: Panel Pilot Router Bits, Carbide Tipped: 1/2" Dia x 1-3/16" x 1/2" ShankThese panel pilot bits have a pointed tip for plunge ...

Jointing Router Bits: Keyhole Router Bits, Carbide Tipped: 3/8" Dia x 3/8" x 1/4" ShankForm keyhole slots in plaques, picture frames, and other wal...

Jointing Router Bits: Keyhole Router Bits, Carbide Tipped: 1/2" Dia x 3/8" x 1/4" ShankForm keyhole slots in plaques, picture frames, and other wal...

Jointing Router Bits: T-Slot Router Bits: 1-1/8" Dia x 13/16" x 1/2" ShankDesigned for creating T-slot wall panels (used to cut their characteristi...

Jointing Router Bits: T-Slot Router Bits: 1-3/8" Dia x 7/8" x 1/2" ShankDesigned for creating T-slot wall panels (used to cut their characteristic ...

Signmaking Router Bits: V-Groove Router Bits, Carbide Tipped: 90° x 3/8" Dia x 7/16" x 1/4" ShankCut decorative V-Grooves and lettering on signs wi...

Signmaking Router Bits: V-Groove Router Bits, Carbide Tipped: 90° x 1/2" Dia x 1/2" x 1/4" ShankCut decorative V-Grooves and lettering on signs wit...

Signmaking Router Bits: V-Groove Router Bits, Carbide Tipped: 60° x 1/2" Dia x 5/8" x 1/4" ShankCut decorative V-Grooves and lettering on signs wit...

Signmaking Router Bits: V-Groove Router Bits, Carbide Tipped: 90° x 5/8" Dia x 1/2" x 1/4" ShankCut decorative V-Grooves and lettering on signs wit...

Signmaking Router Bits: V-Groove Router Bits, Carbide Tipped: 90° x 1-1/4" Dia x 1" x 1/2" ShankCut decorative V-Grooves and lettering on signs wit...

Signmaking Router Bits: V-Groove Router Bits, Solid Carbide: 60° x 9/16" Dia x 7/16" x 1/4" ShankOriginally developed in Europe specifically for pr...

Signmaking Router Bits: V-Groove Router Bits, Carbide Tipped: 90° x 1/2" Dia x 1/2" x 1/4" ShankCut decorative V-Grooves and lettering on signs wit...

Jointing Router Bits: Dovetail Router Bits: 9° x 3/8" Dia x 3/8" x 1/4" ShankStandard Equipment:45800 Dovetail Router BitSpecifications: Diameter (...

Jointing Router Bits: Dovetail Router Bits: 9° x 3/8" Dia x 3/8" x 1/2" ShankStandard Equipment:45802 Dovetail Router BitSpecifications: Diameter (...

Jointing Router Bits: Dovetail Router Bits: 14° x 1/2" Dia x 1/2" x 1/4" ShankThe 14¬∞ dovetail bit is used with common half-blind dovetail jigs, a...

Jointing Router Bits: Dovetail Router Bits: 10° x 1/2" Dia x 5/8" x 1/2" ShankThe 10¬∞ dovetail bit is used with the Incra and Leigh dovetail syste...

Jointing Router Bits: Dovetail Router Bits: 14° x 1/2" Dia x 0.532" x 1/2" ShankThe 14¬∞ dovetail bit is used with common half-blind dovetail jigs,...

Jointing Router Bits: Dovetail Router Bits: 7° x 3/4" Dia x 7/8" x 1/2" ShankFor the Keller Dovetail Templates and certain Incra applications, 7¬∞ ...

Jointing Router Bits: Dovetail Router Bits: 14° x 3/4" Dia x 3/4" x 1/2" ShankThe 14¬∞ dovetail bit is used with common half-blind dovetail jigs, a...

Jointing Router Bits: Dovetail Router Bits: 7° x 9/32" Dia x 1/2" x 1/4" ShankIndustrial quality carbide tipped bits for the Porter Cable Jig 4212....

Jointing Router Bits: Dovetail Router Bits: 7° x 17/32" Dia x 13/16" x 1/2" ShankIndustrial quality carbide tipped bits for the Porter Cable Jig 42...

Jointing Router Bits: Dovetail Router Bits: 14° x 1/2" Dia x 1/2" x 1/4" ShankThis dovetail bit has a shank-mounted ball bearing guide for routing ...

Profiling Router Bits: Core Box Router Bits, Carbide Tipped: 1/8" Rad x 1/4" Dia x 1/4" x 1/4" ShankCut half-round grooves for fluted moldings, col...

Profiling Router Bits: Core Box Router Bits, Carbide Tipped: 3/16" Rad x 3/8" Dia x 1/4" x 1/4" ShankCut half-round grooves for fluted moldings, co...

Profiling Router Bits: Core Box Router Bits, Carbide Tipped: 1/4" Rad x 1/2" Dia x 3/8" x 1/4" ShankCut half-round grooves for fluted moldings, col...

Profiling Router Bits: Core Box Router Bits, Carbide Tipped: 5/16" Rad x 5/8" Dia x 7/16" x 1/4" ShankCut half-round grooves for fluted moldings, c...

Profiling Router Bits: Core Box Router Bits, Carbide Tipped: 3/8" Rad x 3/4" Dia x 7/16" x 1/4" ShankCut half-round grooves for fluted moldings, co...

Profiling Router Bits: Core Box Router Bits, Carbide Tipped: 1/2" Rad x 1" Dia x 5/8" x 1/4" ShankCut half-round grooves for fluted moldings, colum...

Profiling Router Bits: Core Box Router Bits, Carbide Tipped: 1/4" Rad x 1/2" Dia x 3/8" x 1/4" Shank with Upper BBDesigned for fluting and 'V' groo...

Profiling Router Bits: Ball End Router Bits, Carbide Tipped: 1/4" Rad x 7/16" Dia x 1/2" x 1/2" ShankCut channels for pipes or cables using the bal...

Profiling Router Bits: Ball End Router Bits, Carbide Tipped: 3/8" Rad x 11/16" Dia x 1/2" x 1/2" ShankCut channels for pipes or cables using the ba...

Profiling Router Bits: Bowl & Tray Router Bits, Carbide Tipped: 1/4" Rad x 3/4" Dia x 5/8" x 1/4" ShankFor routing solid wood serving trays, fl...

Profiling Router Bits: Bowl & Tray Router Bits, Carbide Tipped: 1/4" Rad x 3/4" Dia x 5/8" x 1/2" ShankFor routing solid wood serving trays, fl...

Profiling Router Bits: Bowl & Tray Router Bits, Carbide Tipped: 1/4" Rad x 1-1/8" Dia x 5/8" x 1/2" ShankFor routing solid wood serving trays, ...

CNC Router Bits: Spiral Plunge Router Bits, Solid Carbide: 1/8" Dia x 1/2" x 1/4" Shank Up-CutSpiral-flute bits combine a shearing action in cuttin...

CNC Router Bits: Spiral Plunge Router Bits, Solid Carbide: 3/16" Dia x 3/4" x 1/4" Shank Up-CutSpiral-flute bits combine a shearing action in cutti...