Products

Trimming Router Bits: Flush Trim Router Bits, Carbide Tipped: 1/2" Dia x 1" x 1/4" ShankUse this flush trimming bit for laminate work or for templa...

Trimming Router Bits: Flush Trim Router Bits, Carbide Tipped: 1/2" Dia x 1/2" x 1/4" ShankUse this flush trimming bit for laminate work or for temp...

Trimming Router Bits: Flush Trim Router Bits, Carbide Tipped: 1/2" Dia x 1" x 1/2" ShankUse this flush trimming bit for laminate work or for templa...

Trimming Router Bits: Flush Trim Router Bits, Carbide Tipped: 1/2" Dia x 1" x 1/4" ShankFor an extremely smooth finish, choose the three-flute conf...

Trimming Router Bits: Flush Trim Router Bits, Carbide Tipped: 1/2" Dia x 1" x 1/2" ShankFor an extremely smooth finish, choose the three-flute conf...

Trimming Router Bits: Flush Trim Router Bits, Carbide Tipped: 1/2" Dia x 1-1/2" x 1/2" ShankUse this bit for template or pattern work where the wor...

Trimming Router Bits: Flush Trim Router Bits, Carbide Tipped: 1/2" Dia x 2" x 1/2" ShankUse this bit for template or pattern work where the workpie...

Trimming Router Bits: Flush Trim Router Bits, Carbide Tipped: 1/2" Dia x 1-1/2" x 1/2" Shank with Double Ball BearingUse this bit for template or p...

Trimming Router Bits: Laminate Trimmer with Euro Square Bearing Router Bits, Carbide Tipped: 1/2" Dia x 19/64" x 1/4" ShankAmana Tool industrial qu...

Trimming Router Bits: No-File Trim Router Bits, Carbide Tipped: 0.059 Rad x 1/2" Dia x 3/8" x 1/4" ShankEliminate the time-consuming hand-filing th...

Trimming Router Bits: No-File Trim Router Bits, Carbide Tipped: 0.059 Rad x 1/2" Dia x 3/8" x 1/2" ShankEliminate the time-consuming hand-filing th...

Trimming Router Bits: Flush Trim 'V' Groove Router Bits, Carbide Tipped: 5/8" Dia x 1" x 1/4" ShankTrim the edges of face frames flush with cabinet...

Trimming Router Bits: Flush Trim 'V' Groove Router Bits, Carbide Tipped: 5/8" Dia x 1" x 1/2" ShankTrim the edges of face frames flush with cabinet...

Trimming Router Bits: Overhang Trim Router Bits, Carbide Tipped: 1/8" Overhang x 3/8" Dia x 1/2" x 1/4" ShankStage flush trimming cuts, whether in ...

Trimming Router Bits: Overhang Trim Router Bits, Carbide Tipped: 1/16" Overhang x 1/2" Dia x 1/2" x 1/4" ShankStage flush trimming cuts, whether in...

Trimming Router Bits: Overhang Trim Router Bits, Carbide Tipped: 1/16" Overhang x 1/2" Dia x 1/2" x 1/2" ShankStage flush trimming cuts, whether in...

Trimming Router Bits: Bevel Trim Router Bits, Carbide Tipped: 15° x 5/8" Dia x 1/4" x 1/4" Shank with Ball BearingThis is a steel-bodied, carbide-t...

Trimming Router Bits: Bevel Trim Router Bits, Carbide Tipped: 25° x 3/4" Dia x 1/4" x 1/4" Shank with Ball BearingThis is a steel-bodied, carbide-t...

Trimming Router Bits: Bevel Trim Router Bits, Carbide Tipped: 45° x 1-3/32" Dia x 1/4" x 1/4" Shank with Ball BearingThis is a steel-bodied, carbid...

Trimming Router Bits: Bevel Trim Router Bits, Carbide Tipped: 22° x 15/16" Dia x 7/16" x 1/4" Shank with Ball BearingThis is a steel-bodied, carbid...

Trimming Router Bits: Bevel Trim Router Bits, Carbide Tipped: 7° x 3/4" Dia x 7/16" x 1/4" Shank with Ball BearingThe solid construction of this ca...

Trimming Router Bits: Bevel Trim Router Bits, Carbide Tipped: 0° x 7/8" Dia x 1/4" x 1/4" Shank with Ball BearingAn assembly offers the option of s...

Trimming Router Bits: Bevel Trim Router Bits, Carbide Tipped: 15° x 1" Dia x 1/4" x 1/4" Shank with Ball BearingAn assembly offers the option of sw...

Jointing Router Bits: Special Amerock Hinge Router Bits, Carbide Tipped: 1-1/8" Dia x 21/32" x 3/8" ShankThis bit is designed to produce a T-slot f...

Jointing Router Bits: Special Amerock Hinge Router Bits, Carbide Tipped: 1-19/32" Dia x 21/32" x 3/8" ShankThis bit is designed to produce a T-slot...

Profiling Router Bits: Cove Router Bits, Carbide Tipped: 1/4" Rad x 7/8" Dia x 9/16" x 1/4" ShankThe covetto form – produced by the cove bit – is o...

Profiling Router Bits: Cove Router Bits, Carbide Tipped: 3/8" Rad x 1-1/8" Dia x 9/16" x 1/4" ShankThe covetto form – produced by the cove bit – is...

Profiling Router Bits: Cove Router Bits, Carbide Tipped: 1/2" Rad x 1-3/8" Dia x 3/4" x 1/4" ShankThe covetto form – produced by the cove bit – is ...

Profiling Router Bits: Cove Router Bits, Carbide Tipped: 1/2" Rad x 1-3/8" Dia x 3/4" x 1/2" ShankThe covetto form – produced by the cove bit – is ...

Profiling Router Bits: Roman Ogee Router Bits, Carbide Tipped: 5/32" Rad x 1" Dia x 5/8" x 1/4" ShankThe Roman ogee bit, which has a convex curve c...

Profiling Router Bits: Roman Ogee Router Bits, Carbide Tipped: 5/32" Rad x 1" Dia x 5/8" x 1/2" ShankThe Roman ogee bit, which has a convex curve c...

Profiling Router Bits: Roman Ogee Router Bits, Carbide Tipped: 1/4" Rad x 1-3/8" Dia x 13/16" x 1/4" ShankThe Roman ogee bit, which has a convex cu...

Profiling Router Bits: Roman Ogee Router Bits, Carbide Tipped: 1/4" Rad x 1-3/8" Dia x 13/16" x 1/2" ShankThe Roman ogee bit, which has a convex cu...

Jointing Router Bits: Rabbeting Router Bits, Carbide Tipped: 3/8" Depth x 1-1/4" Dia x 1/2" x 1/4" ShankThis is the basic rabbeting bit. It cuts 3/...

Jointing Router Bits: Rabbeting Router Bits, Carbide Tipped: 3/8" Depth x 1-1/4" Dia x 1/2" x 1/2" ShankThis is the basic rabbeting bit. It cuts 3/...

Jointing Router Bits: Rabbeting Router Bits, Carbide Tipped: 1-3/8" Dia x 1/2" x 1/4" ShankThe Multi-Rabbet bit steps in 1/16" increments from a 1/...