Festool FS/2 Guide Rails

Used with the plunge cut circular saws or routers.

Festool Guide Rail Applications

Making precision cuts with our plunge cut circular saw or creating straight grooves and dados with our routers has never been easier. Taking the tool to the material instead of the material to the tool is the best way to save time, energy, and money. With Festool guide rail systems, you do not need to use an expensive panel saw or worry about pushing a heavy piece of material through a table saw or across a router table. Getting splinter-free cuts, and perfect edges is as simple as laying the guide rail on the workpiece, aligning it to your cut-line, and pushing the tool effortlessly across the rail.

When used with our TS 55 or TS 75 plunge cut circular saws, you can get cuts that are splinter-free and absolutely straight in wood and other materials like plastic, composites, solid surface and other related materials. Cutting accurate, straight grooves could not be any simpler than when using a Festool router with the optional guide stop. An optional hole drilling set and one of our hole series rails make fast work of placing perfect 32mm shelf pins and 35mm holes for European hinges in cabinets.

A special non-slip strip helps to prevent guide rail movement as well as protect the workpiece surface. Two continuous T-slots serve as channels that allow clamp and limit stop connection at any point. These same T-slots serve as connection points when joining two rails together.

32" Guide Rail FS 800

PART#: 491499
COST: $80.00

Use the FS 800 Guide Rail (32 inches) with the Festool TS Plunge cut saw to make precision cuts up to 26 inches long. Connect rails using Festool Guide Rail Connectors to make limitless cuts.

55" Guide Rail FS 1400

PART#: 491498
COST: $125.00

Use the FS 1400 Guide Rail (55 inches) with the Festool TS Plunge cut saw to make precision cuts up to 49 inches long. Connect rails using Festool Guide Rail Connectors to make limitless cuts.

75" Guide Rail FS 1900

PART#: 491503
COST: $195.00

Use the FS 1900 Guide Rail (75 inches) with the Festool TS Plunge cut saw to make precision cuts up to 69 inches long. Connect rails using Festool Guide Rail Connectors to make limitless cuts.

Guide Rail Connector

PART#: 482107
COST: $17.00

Connect any number of guide rails for accurate, limitless cutting with Festool Guide Rail Connectors. Connectors fit in integrated guide rail T-slots for secure cutting. Includes 1 connector (2 are needed). Can also be used to connect the Festool MFS templates.

Hot Tool Deals!!!

9

9" Diablo Demo Demon Reciprocating Saw Blade 2 Pack Special

Two for the Price of One!

PART#: DS0906CWP
COST: $9.95

The Diablo Demo Demon Reciprocating Blades are specifically designed for maximum performance in nail-embedded wood. This 6 TPI high performance carbide tipped blade delivers 10X longer cutting life.

See LARGER IMAGE

Bosch Knife

Retractable Knife

PART#: H290B
COST: $12.95

Includes pouch.

See LARGER IMAGE

CH Hanson 03040 Magnetic Stud Finder

PART#: 03040
COST: $7.95

The 03040 Magnetic Stud Finder positively locates screws and steel studs with powerful rare earth magnets.

See LARGER IMAGE , MORE INFO

LeadCheck Instant Lead Testing Swabs

LeadCheck Instant Lead Testing Swabs

PART#: 8S20C
COST: $19.95

Self-contained test units which provide a rapid, easy to use, specific test for lead on any surface.

See LARGER IMAGE , MORE INFO

100 Pc Master Screwdriver Bit Set

PART#: W1389
COST: $9.95

Includes phillips, slotted, torx, clutch, spline, square, spanner, hex, triwing, pozi, metric bits and holders.

See LARGER IMAGE , MORE INFO

SHOPPING INFORMATION

SUBTOTAL: $0.00

SHIPPING CALCULATOR
Add items to cart before calculating charges.

View Cart

Check Out
Shopping Cart
Change the item quantity by clicking the "MODIFY CART" button below.

No Promo Codes are available at this time

The shopping cart is empty.

Coastal Tool - Discount Power Tools & Hand Tools nsession