Festool CT 36 E AutoClean Dust Extractor

9.5 Gal Capacity, 137 CFM Max Suction

Dust control is an integral part of the Festool system and design philosophy. That is why the CT 36 AutoClean is equipped with tool-triggered auto start functionality so that when you plug your tool into the supplied outlet socket, the vacuum cycles with the tool. This represents greater efficiency in dust extraction, noise reduction, and with less energy consumption versus a constant-on unit. Variable suction force allows you to regulate the suction based on your tasks. A small detail sander may not require the full 137 CFM of this unit, but a router may require it.

Festool 584014 Dust Extractor

Standard Equipment:

  • CT 36 E AC Vacuum
  • 1"x 11.5' Anti-static Suction Hose
  • 1 Filter


When it comes to capacity, the CT 36 is the largest of the lot. The CT 36 can tackle any task with ease with plenty of suction force and capacity to spare. Tool not available for export.

Festool 584014 Dust Extractor Application

Free Shipping!

Purchasing this item qualifies you for free UPS ground shipping within the lower 48 states on your entire order.

PART#: 584014
COST: $800.00


  • Power Rating: 350-1,200 Watts, 2.9-10 Amps, 120V
  • Capacity: 9.5 Gallons
  • Static Water Lift: 96"
  • Max Suction Capacity: 137 CFM
  • Noise Level...
    Low Setting: 62 dB
    Max Setting: 71 dB
  • Dimensions: 24.8" x 14.4" x 23.5"
  • Weight: 29.8 lbs


  • 9.5 gallon (36 L) capacity.
  • Compact design with large volume.
  • High performance turbine for consistent high-power suction.
  • Automatic start with tool start-up increases efficiency.
  • Antistatic function prevents static buildup during use.
  • Comes equipped with a larger diameter black 36mm hose that is kink-proof and won't attract dust.
  • Includes open face disposable plastic bags that act as liners for the CT 36 E AC.
  • The CT 36 E AC is not HEPA compatible.
  • Dimensions: 24.8"D x 14.4"W x 23.4"H
  • Weight: 29.8 lbs.
  • Noise Level: 71dB(A)
  • Power Consumption: 350-1200 watts/2.9-10 amps, 120v AC
  • Maximum Suction Capacity: 137 CFM (3,900 l/min)
  • Maximum Vacuum: 96" Static water lift (24,000 Pa)
  • Tool triggered or manual on-off switch with smooth start up and shut off delay.
  • Integrated filter cleaning device cleans the filter automatically.
  • Stepless electronic suction control for maximum control.
  • Wet or dry extraction without complicated changeover.
  • Integrated storage for accessories and tools.
  • Also features blower port.
  • Antistatic equipment protects from electrostatic charging
  • Flat area for tool storage and stacking systainers.
  • Locking rear brakes prevent vacuum from sliding around.

Hot Tool Deals!!!

Bosch Knife

Retractable Knife

PART#: H290B
COST: $12.95

Includes pouch.


CH Hanson 03040 Magnetic Stud Finder

PART#: 03040
COST: $7.95

The 03040 Magnetic Stud Finder positively locates screws and steel studs with powerful rare earth magnets.


LeadCheck Instant Lead Testing Swabs

LeadCheck Instant Lead Testing Swabs

PART#: 8S20C
COST: $19.95

Self-contained test units which provide a rapid, easy to use, specific test for lead on any surface.


100 Pc Master Screwdriver Bit Set

PART#: W1389
COST: $9.95

Includes phillips, slotted, torx, clutch, spline, square, spanner, hex, triwing, pozi, metric bits and holders.




Add items to cart before calculating charges.

View Cart

Check Out
Shopping Cart
Change the item quantity by clicking the "MODIFY CART" button below.

No Promo Codes are available at this time

The shopping cart is empty.

Coastal Tool - Discount Power Tools & Hand Tools nsession